• +2-35734687

  • sales@technoscientific.net

Stay Connected:

SpectroDirect (standard equipment)

Share

SpectroDirect (standard equipment)

code :

Highlights

  • 330 to 900 nm
  • Interface RS232
  • Large illuminated display
  • Touch-sensitive film keypad with logical layout

The SpectroDirect is a modern single-beam spectrophotometer with an excellent price/performance ratio that is specifically designed for water testing. The instrument is equipped with a wide range of pre-programmed methods based on the proven range of Lovibond® tube tests, tablet reagents, liquid reagents and powder reagents (Vario Powder Packs).

Applications

  • Boiler Water
    •  
  •  Cooling Water
    •  
  •  Disinfection Control
    •  
  •  Drinking Water Treatment
    •  
  •  Galvanization
  •  Pool Water Control
    •  
  •  Pool Water Treatment
    •  
  •  Raw Water Treatment
    •  
  •  Waste Water Treatment

  • Optics 
    The SpectroDirect is a single-beam spectral photometer (see illustration).
    The light source is a tungsten halogen lamp with flash function. The lamp is switched on only momentarily during the measurement process1), so there is no need for a warm-up period.
    The SpectroDirect is ready to perform a self-test as soon as it is switched on.
    The light passes through an entry slot to the monochromator, where it is split into spectral ranges. The monochromator is a holographically produced, transparent grating. The movable mirror ensures that light of the desired wavelength is focused automatically so that it passes through the exit slot, into the sample chamber and therefore through the water sample. The light that is not absorbed by the sample travels to the silicon
    photodiode detector. This signal is then evaluatedby a microprocessor and shown as a result in the display.
    1) (Exception: permanent light is used for a wavelength scan).
  • Multifunctional sample chamber 
    Round vials measuring 16 mm and 24 mm in diameter and rectangular cells with pathlengths from 10 to 50 mm may be used without an adapter. Only the 10 mm cell will be fixed by a little holder that must inserted into the sample chamber.
  • New methods 
    Test methods are continuously updated to suit market requirements.
    You can find updates for new methods and additional languages on our website at www.lovibond.com.
    Functions 
    ■ Pre-programmed Lovibond® methods
    ■ Absorption
    ■ Transmission
    ■ Spectral data recording
    ■ User calibration (polynomials)
    ■ Concentration (linear)
    ■ Kinetics
  • Self-test 
    After it is switched on, the SpectroDirect automatically performs a self-test – beginning
    with a function test of the stepper motor and the halogen lamp, followed by an optics test.
    For this purpose, the unit has a built-in didymium glass filter. This filter checks the correct wavelength setting. If the wavelengths are incorrect, the optical system is automatically adjusted during the self-test.
  • Maintenance 
    Thanks to the design of the SpectroDirect, the only maintenance that is required is replacement of the light source. The lamp is situated at the back of the photometer in an easily accessible position. Changing the lamp is fast and simple and does not require any tools. The positioning of the assembly ensures optimum focusing of the halogen lamp.
  • Power supply 
    The required input voltage is 12 V.
    The SpectroDirect is connected to an external power pack as standard. Battery operation is also possible by using an external energy station (see accessories).
  • Choice of language 
    The user prompt in the display can be switched to German, English, French, Italian, Spanish or Portugese. When further languages become available, they will be updated via internet.
  • N.I.S.T. Traceability 
    This spectrophotometer can be tested using a Secondary Standard Filter Set (order code 711160) which is N.I.S.T. traceable. Furthermore the instrument may be calibrated for each method in a "user calibration mode” with N.I.S.T. traceable standards.
  • Printer/PC connection 
    On the back of the SpectroDirect photometer, there is an RS232 interface with a 9-pin D-Sub connector for connection of a PC or a printer with serial interface (see accessories).
  • Printing data 
    Every result is printed with date, time, reg. no, code no., measuring range and method number.
  • Storing data 
    You can store results of programmed and user-specific methods (polynomials) in a memory with a capacity of 1000 data sets. Alongside the result, the data sets contain information on method, date and time of the test.
  • User prompt 
    The user prompt is a convenient and easy to understand feature that guides the user step by step all the way through to the test result.
  • Zero calibration and measurements 
    The user chooses the desired method either from the method list in alphabetical order or by entering a numerical code. If desired additional information like the required vial, the reagent type and the measuring range can be displayed using the functional keys. The date and time are shown in the display by pressing the "clock key". The SpectroDirect automatically selects the correct wavelength.
    Zero calibration is performed with the water sample by pressing the ZERO key.
    A characteristic coloration develops when you add the indicator to the water sample. Press the [Test] key to initiate the measurement (which starts either immediately or after the time required for colour development).
  • Countdown function 
    With some methods, after adding the indicator to the water sample, the user has to wait for a predefined colour reaction time. This time interval is shown in the display. The remaining time is displayed continuously. An alarm sounds during the last 10 seconds of the time period. Measurement then starts automatically, and the result is shown in the display. The countdown function can be switched off to allow rapid processing of a series of samples.
  • Differentiation of results 
    The SpectroDirect allows differentiated tests for certain methods. With the Chlorine method, for example, differentiated measurement is possible for free, combined and total chlorine.
  • Functions 
    The SpectroDirect is ideal for routine laboratory use and is equipped with additional functions for user-specific applications. One example is the creation of a user-defined method for a routine check.
  • Spectral data 
    A wavelength scan is performed over the user-defined interval between 330 and 900 nm.
    The display shows the graph of the spectrum; if the user presses a key, the display also shows a data list with the corresponding maximum and minimum absorption levels.
  • Absorption/Transmission 
    Using this function, the operator can, for example, carry out measurement of standards with different concentrations using the user-selected wavelength in order to obtain the data pairs required for a polynomial. Result output is in Abs and % Transmission.
  • Polynomials 
    With the help of an external mathematical program, the corresponding polynomial is created from data pairs (concentration/absorption).
    A known polynomial may also be used. 25 order polynomials  (y = A+Bx+Cx2 +Dx3 +EX4 + FX5) can be stored together with user-specific parameters such as wavelength, measuring range, unit and number of decimals.
  • Concentration 
    This function can be used to measure 2 to 14 known standards. On the basis of the concentrations/absorption pairs obtained, the photometer will calculate a linear interpolation between the measured points. Up to 10 methods can be stored for further sample measurements.
Light Source Pre-adjusted tungsten halogen lamp
Monochromator Holographic grating (600 lines/mm)
Wavelength Range 330 - 900 nm
Wavelength Accuracy ±2 nm
Wavelength Reproducibility ±1 nm
Photometric Range -0,3 - 2,5 Abs
Operation Acid and solvent resistant, touch-sensitive keypad with audible feedback
Display Backlit LCD graphic display
Suitable Vials Rectangular Cuvettes 10 mmRound Cuvettes 16 mm
Round Cuvettes 24 mm
Interfaces RS 232
Internal Storage 1000 test data sets
Power Supply 100 - 240 V / 50-60 Hz
Auto – OFF Yes
Portability Benchtop
Compliance CE
Languages User Interface German, English, French, Portuguese, Italian, Spanish
Dimensions 275 x 150 x 270 mm
Weight 3.2 kg

Accessories SpectroDirect (standard equipment)

Related Products

TechnoScientific
SpectroDirect (standard equipment)
TechnoScientific
SpectroDirect (advanced features)
TechnoScientific
XD Spectrophotometers 7000 (vis)

Categories

Latest Products

© 2018 New Vision IT. All Rights Reserved.